RZR ROLL-UP TOOL BAG WITH 36PC TOOL KIT

FEATURES & BENEFITS

• PRP’s RZR Roll-Up Tool Bag with 36pc Tool Kit
• Includes all the essential tools you need to work on a Polaris RZR
• Roll-Up Tool Bag keeps tools organized, and quiet while you ride
• Lightweight and easy to carry grab handle
• Includes PRP’s innovative RZR Belt Changing Tool & Bolt

TOOLS INCLUDED IN THE KIT

• 1- Flat Head screwdriver – Hose clamps
• 1- Groove joint pliers
• 1- Big head-cutting pliers
• 1- Needle nose pliers – For hard-to-reach spots
• 1- Crescent wrench – Used on almost everything
• 1- Ball peen hammer – If something doesn’t fit… make it fit
• 1- 1/4″ ratchet
• 1- 3/8″ ratchet
• 1 – 1/4″ extension bar
• 1 – 3/8″ extension bar
• 1 – 1/4″ flex extension bar
• 1 – T25 x 1/4″ – Door-skins, buss bar, CV boot guard, ECU
• 1 – T27 x 1/4″ – Overflow bottle, EPS cover, seat adjuster
• 1 – T40 x 1/4″ – Bodywork, hood
• 1 – 3/8″ to 1/2″ adapter
• 1 – 5/8″ Spark Plug Socket
• 1 – 8mm Allen Head Socket x 3/8″ – Diff drain & fill, Trans drain & fill
• 1 – 8mm Socket x 1/4″ – CVT Cover, side case
• 1 – 10mm Socket x 3/8″ – Skid plate, ground wire, starter solenoid, shift sensor, ex heat shield, rad mount, buss bar
• 1 – 11mm Socket x 3/8″ – PRP Belt Changing Tool & Bolt, various aftermarket products
• 1 – 13mm Socket x 3/8″ – Frame support, sway bar mount, front facia, brake line, steering shaft, battery cable, ext water pump, pedal assembly, rock guard
• 1 – 15mm Socket x 3/8″ – Ball joint pinch bolts, steering shaft, EPS, cage, harness bar, rear caliper brakes, rear hub, swaybar, remove the secondary clutch
• 1 – 16mm Socket x 3/8″ – Diff mount, Front caliper bracket, seat belts
• 1 – 17mm Socket x 3/8″ – Steering shaft, turbo oil line
• 1 – 18mm Socket x 3/8″ – Shocks, A-arms, trailing arm, frame support, radius rods, tie rod, diff
• 1 – 19mm Socket x 3/8″ – Turbo oil line, lug nuts, seat belts
• 1 – 21mm Socket x 3/8″ – Primary clutch bolt
• 1 – 27mm Socket x 1/2″ – Axle nut
• 1 – 8mm Combo Wrench – CVT Cover, side case
• 1 – 10mm Combo Wrench – Skid plate, ground wire, starter solenoid, shift sensor, ex heat shield, rad mount, buss bar
• 1 – 13mm Combo Wrench – Frame support, sway-bar mount, front fascia, brake line, steering shaft, battery cable, ext water pump, pedal assembly, rock guard
• 1 – 15mm Combo Wrench – Ball joint pinch bolts, steering shaft, EPS, cage, harness bar, rear caliper brakes, rear hub, sway-bar
• 1 – 17mm Combo Wrench – Steering shaft, turbo oil line
• 1 – 18mm Combo Wrench – Shocks, A-arms, trailing arm, frame support, radius rods, tie rod, diff
• 1 – PRP Belt Changing Tool –  (RZR 570,800,900,1000) Insert the tool into the secondary clutch, and tighten the bolt down with a ratchet (or impact gun). The tool holds the clutch open and allows you to change a belt in seconds.
• 1 – Belt Changing Bolt – (RZR Turbo, Turbo S, RS1, PRO XP) Insert the bolt into the secondary clutch and tighten it down with a ratchet (or impact gun). The bolt holds the clutch open and allows you to change a belt in seconds.